seat belt retractor - Page 2 - IMBOC
LinkBack Thread Tools Display Modes
post #16 of 25 (permalink) Old 01-11-2013, 08:03 PM

Monster BullittHead
Join Date: Oct 2007
Location: Raleigh
Posts: 1,282
I treated mine just one time about two years ago and it is still working very well. Prior to treating it, the belt had to be fed in for the last 18" or so.

HiTech StageII cams, BBK LTs, MAC ProChamber mid-pipe, Flow Master 50s, JLT CAI, X-Cal3(custom tune for 93oct), SVT Focus fuel pump, Steeda UDP, 3.90 gears (actually 3.91), Auburn Pro w/ 31 splines, Battery relocation, MGW shifter, Eibach Anti-Sway Bars, H&R Race springs, Bilstein HD Struts, MM Extreme Duty LCA w/ adj perches, MM CC Plates, MM FL SFC, MM Panhard Bar, 17x9 & 17x10.5 Bullitts, NA 285rwhp 295rwtq, 12.53ET @ 110.55mph on motor(4.10 gears), 11.66 @ 121.56mph(only 1.83 60') with 130shot of nitrous making 417rwhp/498tq(3.91 gears)
TRUEBLUE3934 is offline  
Sponsored Links
post #17 of 25 (permalink) Old 01-12-2013, 09:28 PM

PY-Like BullittHead
Join Date: Aug 2004
Location: El Dorado Hills, NorCal.
Posts: 4,033
Thumbs down

Originally Posted by doughboyracing
That's good news, as taking the lower trim off looks to be a pain. I cracked the trim panel around the glass tryin to get it off.
As I ranted long and hard before Re- dealing with my rear interior panal and in general. Mustang cheap plastic is 'CRAP'

"Beer is proof God Loves us and wants us to be Happy" ~ Benjamin Franklin
Bullistic is offline  
post #18 of 25 (permalink) Old 01-13-2013, 07:33 PM

Monster BullittHead
doughboyracing's Avatar
Join Date: Aug 2011
Location: Whitehouse, TX
Posts: 558
You said it, Ron. I just got it back in, with crack. Makes me sad.

Back to the main topic, I think the reason my belts were hard to retract is because they'd become twisted the wrong way. I got the driver's side turned, hopefully the right way.

"You work your side of the street, and I'll work mine." Lt. Frank Bullitt.
doughboyracing is offline  
post #19 of 25 (permalink) Old 01-17-2013, 03:58 PM

PY-Like BullittHead
Join Date: Aug 2004
Location: El Dorado Hills, NorCal.
Posts: 4,033

I didn't crack mine, just kind of gave up and put it back together before I did. BTW I was taking it off for s different reason.

"Beer is proof God Loves us and wants us to be Happy" ~ Benjamin Franklin
Bullistic is offline  
post #20 of 25 (permalink) Old 01-17-2013, 06:43 PM

Monster BullittHead
Chuck01's Avatar
Join Date: Aug 2010
Location: Knoxville, TN
Posts: 1,118
Mine constantly get stuck/twisted and it makes me nuts! I'm going to order a new one (pair) I think and just deal with pulling the interior apart.

Chuck - 2001 Dark Highland Green Bullitt - SOLD 5/11/13.
Chuck01 is offline  
post #21 of 25 (permalink) Old 02-02-2013, 09:58 PM

Mega BullittHead
Join Date: Dec 2011
Location: Tumwater, WA
Posts: 244
mine started doing the exact same thing. Dealership said the warranty only covers 5 years or 50,000 miles for the seatbelt. My local dealership said the retractor and belt are all one piece and costs about 230 dollars.
BullittDude is offline  
post #22 of 25 (permalink) Old 02-20-2013, 06:51 PM

Join Date: Jan 2013
Location: Urbana, OH
Posts: 26
Glad I found this post. Really the only complaint of my newfound Bullitt. Will try armor all and post back with results
Fivepointstang is offline  
post #23 of 25 (permalink) Old 02-20-2013, 08:40 PM
Join Date: Sep 2012
Location: Toronto, Canada
Posts: 6
There was a TSB issued for this problem
TSB-04-24-21 not sure if they would still honour it.

The part number for the fix is YR3Z-63611D70-AA some kind of teflon tape that helps the seat belt roll back.
Monevasia is offline  
post #24 of 25 (permalink) Old 05-08-2013, 04:49 PM
Join Date: Oct 2001
Location: Hamilton, Ontario, Canada
Posts: 878
I have a Ford dealer as a customer and as a lark I got the parts lady to see if a seat belt was still available. As far as she could see only black is still available--then she mentioned the service dept regularly gets complaints about the Mustangs seat belt and they use silicone (Armour-all is mostly silicone) to lube the belt and it really works.
bullitt3980 is offline  
post #25 of 25 (permalink) Old 05-08-2013, 05:35 PM
Lifetime Supporting Member
DavidMidgley's Avatar
Join Date: Mar 2006
Location: Hurst. TX.
Posts: 17,967
Now that is interesting.

I knew I could use my Armour All for something besides slinging it up from the tires to the bodywork....

My name is David J. Midgley. But you doesn't have to call me that. You can call me David. Or you can call me David J. Or you can call me David Midgley. But you doesn't have to call me David J. Midgley....
DavidMidgley is offline  

Quick Reply

Register Now

In order to be able to post messages on the IMBOC forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome