Mustang Bullitt Forum banner
1 - 20 of 23 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hello everyone My name is Jorge, iam the owner of three 2001 bullitts 2 true blue and one dark highland green. Based out of Las Vegas NV. I’am the one making the fiberglass replica 01 Bullitt mud flap and shaved end cap, soon be to be coming out with a shortened version of the mudflap style. I have sold a few sets of my side skirt caps with no complaints, all positive reviews. What brought me to this page was a customer told me to register because he knows more Bullitt owners need these. Please visit my Facebook page “Mustang HQ” also here are the eBay links to the shaved caps and oe style mud flaps can also order them through the Facebook page just message. Thank you for your time !
Flush style
http://r.ebay.com/T0sWTc

Oe mud flap style
http://r.ebay.com/kkUItq
 

·
Car Whisperer
Joined
·
21,540 Posts
good to know!!!!
 

·
Registered
Joined
·
736 Posts
I bought one last week. I talked to Jorge. I think this is a great alternative. My bullitt isnt my daily anymore, I bought a Mach 1 to drive everywhere now so I assume the fiberglass part will last me a long time. Jorge had the molds made from his OEM parts so they look great.
 

·
BEST BULLITT Nats 06
Joined
·
13,569 Posts
Hello everyone My name is Jorge, iam the owner of three 2001 bullitts 2 true blue and one dark highland green. Based out of Las Vegas NV. I’am the one making the fiberglass replica 01 Bullitt mud flap and shaved end cap, soon be to be coming out with a shortened version of the mudflap style. I have sold a few sets of my side skirt caps with no complaints, all positive reviews. What brought me to this page was a customer told me to register because he knows more Bullitt owners need these. Please visit my Facebook page “Mustang HQ” also here are the eBay links to the shaved caps and oe style mud flaps can also order them through the Facebook page just message. Thank you for your time !
Flush style
http://r.ebay.com/T0sWTc

Oe mud flap style
http://r.ebay.com/kkUItq
Hi Jorge, and welcome! Hey, what are the ID #'s off the shock tower stickers on your 3 Bullitts please so I can get you on the registry if I haven't already! List the number and color of each Bullitt please..
Thanks!
Vicki
 

·
Registered
Joined
·
8 Posts
Good to know, as we lost the right one a few months back (suspect it got knocked off in a car wash)
No longer available from the dealer, as you probably know....
You don't have any sources for the "01 Bullitt heater hoses do you??

Greg, Bullitt 5030 (LeGrand Bullitt, now LeGrand Bullitt 74) (559) 907-4724


=== This is an automatically generated message ===

This is my first post. My Welcome thread is here. Please post all my welcome message there.

=== This is an automatically generated message ===
 

·
Registered
Joined
·
8 Posts
'01 Bullitt mudflap

Good to know, as we lost the right one a few months back (suspect it got knocked off in a car wash)
No longer available from the dealer, as you probably know....
You don't have any sources for the "01 Bullitt heater hoses do you??

Greg, Bullitt 5030 (LeGrand Bullitt, now LeGrand Bullitt 74) (559) 907-4724
 

·
Registered
Joined
·
49 Posts
Good to know, as we lost the right one a few months back (suspect it got knocked off in a car wash)
No longer available from the dealer, as you probably know....
You don't have any sources for the "01 Bullitt heater hoses do you??

Greg, Bullitt 5030 (LeGrand Bullitt, now LeGrand Bullitt 74) (559) 907-4724
I noticed you are in Fresno! I am in Clovis but work in Fresno and own a 2001 DHG Bullitt all blacked out. We will have to get together and check out each others cars.
 

·
Premium Member
Joined
·
32 Posts
Good Evening, Jorge
Have you noticed that the mudflap often does not close the gap where it joins the rest of the rocker panel? Often there is a 1/4" gap or more, sometimes the leading edge is visible. As if the part was made too short. I bought a brand new 2004 Mustang GT and had a "Bullitt Appearance Package" (from the Mustang & Thunderbird accessories catalogue) installed by the dealer (didn't like the fake 1/4 'scoops, fake spoiler wing, and flared rocker panels stock to GT). The mudflaps fit tight and right on my 2004 GT. I've checked out several Bullitts at shows, typically am not satisfied with the fit. Puzzling! Comments?

I'd like to see the "mudflap" with no flap, at all. Would you be willing to make that model? I'd buy!

Thank you,

Gunnar H Christiansen - Bullitt #3004 DHG - Anacortes WA - (360) 220-2770
 

·
Registered
Joined
·
8 Posts
Sorry I didn't get back to you sooner..
My wife drives ours, (so I don't get the tickets, as that car LOVES to run at 80-110) but she didn't hear the cam chain guide and tensioner going to pieces.
The timing chain chewed into the block a bit, and the mechanics did feel I should risk rebuilding it, so we got one of the last Bullitt spec'd engines in Ford's inventory.
Big headache at the moment is that we can't find any hoses for the heater. (Dealer says the parts are obsolete, and no aftermarket parts that fit are available. (they say they're different than the GT Mustang)

Yeah, give me a call one of these days, that's my cell number in the post.

Greg S
 

·
Registered
Joined
·
61 Posts
Good Evening, Jorge
Have you noticed that the mudflap often does not close the gap where it joins the rest of the rocker panel? Often there is a 1/4" gap or more, sometimes the leading edge is visible. As if the part was made too short. I bought a brand new 2004 Mustang GT and had a "Bullitt Appearance Package" (from the Mustang & Thunderbird accessories catalogue) installed by the dealer (didn't like the fake 1/4 'scoops, fake spoiler wing, and flared rocker panels stock to GT). The mudflaps fit tight and right on my 2004 GT. I've checked out several Bullitts at shows, typically am not satisfied with the fit. Puzzling! Comments?

I'd like to see the "mudflap" with no flap, at all. Would you be willing to make that model? I'd buy!

Thank you,

Gunnar H Christiansen - Bullitt #3004 DHG - Anacortes WA - (360) 220-2770
Mine as well as most all that I have seen have that aweful gap. Jorge, can your mold be extended to close that gap? Would buy for sure!
 

·
Registered
Joined
·
61 Posts
He used to sell directly on eBay. I just searched and found a vendor that sells the flaps and rocker panels as a set. He’s in Nevada and so was/is the OP so maybe the same. I will send him a message tonight
 

·
Registered
Joined
·
8 Posts
Hey Jorge,

I'm looking for those mud flaps right now, as I've lost the right side one.
I've got the Black Bullitt, so I'm hoping you have these in black as well.
I'd like to know how much the Left and Right hand parts would be to ship to Fresno, California.
Do you use a special spring bar (the ones they use to attach the flap to the lower bodywork) or are these still available from Ford? (we know there are less and less parts available for this almost 19 year old car....)
I just dropped what they told me was the last Bullitt spec'd 4.6L engine in our Bullitt (#5030) and would like to have it in some car shows, with out the missing mud flap.

Give me a call if you can. (559) 907-4724 for Greg S.

Thanks,
 
1 - 20 of 23 Posts
Top