Mustang Bullitt Forum banner

1/4 mile rims arrived last night.

1087 Views 32 Replies 7 Participants Last post by  BULLITT #1042 (Ray Ackerman)
Got home from and sitting on my porch were the ARE 767 rims. Both rims were 83 bucks to the door from Summitt. Jack the car up to make sure the backspacing was good and it is. They sit just inside the fenderwall just like the factory rims fit. So that means they do not stick out and the rims measure 15-8. The tire I am going with is the Bf goodrich 235/60/15. After a lot of thought I decided to go with this tire mainly because it has alot of sidewall and it measures 8 inches wide. The nitto 275/40/15 I currently have on the car measure 10.5 and they are just a little to wide for a mostly stock Bullitt. I will be going to the track within the next month to get numbers. But I have a feeling with this tire it will match perfectly with the Bullitts stock hp. Ray thanks for making me think about tire width your right a 10 inch tire is just a little to much for a stock bullitt.
1 - 1 of 33 Posts
<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE>
On 2002-02-22 12:09, NOMAD#5506 wrote:
Thanks man now for some 5500 rpm launches. Haaaaaaaaa!!!!!!!!
</BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE>

Been there done those.......your torque boxes will suffer. And when I did it I broke my upper and lower C/A's. Cool deal on the wheels. got any pics?
1 - 1 of 33 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top