Mustang Bullitt Forum banner

2001 Bullitt Dealer four page lay out.

671 Views 15 Replies 7 Participants Last post by  rblack4405
jimmy galloway here,
Just going through some old material I found and I can't believe what I found!
I remember wanting to purchas a 2001 mustang Bullitt but had medical challenges in the way of funds. many of you know what I mean.
Anyway, I discovered a four page layout of the 2001 Bullitt.
On the front is the two mustangs with both of them green.
There are five shots froom the movie.
On the inside are all three new colors for the 2001. DHG(py) code. True blue with code(L2) and the black one with the codes of (UA).
There aare two chase scenes on the first flip page
On the third page you have the bullitt interor, break red pony calipers, gasoline filer lid. It shows the interior froom the drivers seat. There is the seat, pedels, shifter, and edash ares with gages.
There is listed the Functional areas of the Mustang. There is the exteror fof the mustang. Finally, there is the interor.
The Bullitt packafe in 2001 cost $3,695 [MSRP]
On the back, there are two shots of the Bullitt and four more movie shots.
There are two places where tape has been used to cover small paper tears.
I don't know what to do with the foulder, I thought I would go for the best bidder?
Again, I'm Jimmy [email protected]
Beginning to snow in Asheville, NC. Should havea 3/6 inches come tomorrow and I have a dr. appoiintment.
1 - 16 of 16 Posts
This is the original dealer Bullitt brochure from 2001. They are still on Ebay quite often. I have two or three horded away.

I have the hero cards for the 2008. I have a US and Candian version. Cool stuff to keep filed away and pull out and show to people from time to time. I also rare 2008 brochure with the Bullitt in it that another member gave me.
You can check with member "BCMC Prez" Jon. He was able to get two MINT one's for me, for my collection of Memoribila. As to any monetary value. But, If I were you, I would keep it. Great show piece of Bullitt Heritage, to bring out and Flaunt with at FORD Show's.
The real trick is finding a signed one ;)

See less See more
Byron,

Where you been hiding? Your PM box is full. Are you going to make Greg's GTG Saturday?
Charles, I've been busy trying to get my IKE damaged house back together, will probably be working on it some more this weekend. So unfortunatley, I'll probably miss the get together. I just recently got the roof replaced, and now we are doing the demolition/tearout ourselvs (all but 2 rooms in the house have to be ripped out, walls insulation, floors). The house is about 2900 square feet, so we'll be busy for awhile! Hopefully we can get back to fun stuff once the house is put back together.
Bullitt 736, do you know if the ones on Ebay are legitimate? or possible reprints?
stang4.6 said:
Charles, I've been busy trying to get my IKE damaged house back together, will probably be working on it some more this weekend. So unfortunatley, I'll probably miss the get together. I just recently got the roof replaced, and now we are doing the demolition/tearout ourselvs (all but 2 rooms in the house have to be ripped out, walls insulation, floors). The house is about 2900 square feet, so we'll be busy for awhile! Hopefully we can get back to fun stuff once the house is put back together.
:shock: :shock:

That sucks!! Hope you get it together soon. Are you ripping drywall from water damage? Insurance???
a50ina50 said:
Bullitt 736, do you know if the ones on Ebay are legitimate? or possible reprints?
I don't know. I bought mine in 2001 on Ebay. They show up every now and then. The sales people tended to make off with them and sell them rather than make them available.
Bullitt 736 said:
:shock: :shock:

That sucks!! Hope you get it together soon. Are you ripping drywall from water damage? Insurance???

Yep, ripping out drywall and insulation and flooring from water damage, and yes *thank God* insurance is covering it. But if I want to get things done anytime this year, I'm going to have to do a good bit of it myself. Getting contractors (good ones) is still hard.
i just got this off ebay and should have it in a few days... dont know what its out of or where its from but its got a bullitt on it so i had to have it
See less See more
It's the bottom half of the San Fran promo pic with the replica movie car. Haven't seen the article before. Is that page number in the 200+ range?? I wonder if was taken out of a mustang history book?
stang4.6 said:
It's the bottom half of the San Fran promo pic with the replica movie car. Haven't seen the article before. Is that page number in the 200+ range?? I wonder if was taken out of a mustang history book?
i havent gotten it yet but when i do im sure ill be able to tell what its from. ill be upset if i payed $10 for a page out of a book but o well it will look good on my wall. i sent you a pm yesterday to
Hope it is what you want for sure. I remember being at Fun Ford in Aug. 01 at Bristol, there was a stack of Bullitt posters 5" high and they were free for the taking. Later people were selling the same type posters for much money. It was a rip, but people still purchased them.
even if it was free at one time i dont mind. its worth it to me to have them. i like being at car shows and having a bunch of literature about my car...
to me, making money selling something that was free, just does not sit right. but
1 - 16 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top