Mustang Bullitt Forum banner

21 - 24 of 24 Posts

·
BEST BULLITT Nats 06
Joined
·
13,199 Posts
Here it is:

Team Mustang

<O:p
Team Mustang was a group of Ford employees tasked with everything Mustang. From future designs to limited editions, this team was responsible from concept to production. Ford assembled a very talented group to take on this task. This is a short history of one of those vehicles, the 2001 Mustang GT Bullitt.<O:p
<O:p
The Feature vehicle<O:p
<O:p
Ford had decided that every year Team Mustang would come up with a feature vehicle. It started with the 35<SUP>th</SUP> anniversary and Bullitt was the second in the series. The idea had come up that they were not just going to stick a bunch of appearance stuff on this car like the 35<SUP>th</SUP> anniversary. They wanted a complete package. <O:p
<O:p
The first sketch came out of the need for a car for the Special Equipment Marketing Association or ffice:smarttags"
<O:p
Sean looked at the picture and realized, “that’s the car”. Using a 99 Mustang body as a template, he began sketching the concept. He lowered the car and put the torque thrust wheels on it, trying to get the feeling of Steve McQueen’s 68. <O:p
<O:p
The Wheels Would Make All the Difference<O:p
<O:p
Ford had been working with representatives from <ST1:place Superior</ST1:place wheels to create new optional wheels. At the time they only had three designs to choose from. Using some drawings that one of the team had made, they refined the design of the concept car wheels. The concept car wheels were made of billet aluminum and were a one off, or a one of a kind wheel. <O:p
<O:p
The wheel was slated to be an optional wheel on the production car, so the team essentially took the optional 15” wheel design and made it into an 18" wheel. They tweaked the sections on it and then had the show car wheels manufactured from there. The wheel was already set to go into production because of its very strong “heritage”, which was very identifiable to hot rodders and gear heads. <O:p
It was something new, being different from the smooth flat look of recent wheels. This design had some depth, different textures and color, so it was very unique and special. That theme was essential to the wheels, the color of the vehicle, as well as to everything else in the overall vehicle design. <O:p
<O:p
What ended up as the GT Premium, “Bullitt”, rims were not made specifically for the Bullitt, but the design came from the Bullitt show car. Tooling alone would have been prohibitive for producing only 5000 sets of wheels. In the end a part must pay for itself to be marketable.
<INS dateTime=2006-05-02T17:02 cite="mailto:GAutry"><INS cite="mailto:%20"><O:p</INS></INS>
What made the original 1968 “Bullitt” unique was its understated color/markings and its aftermarket wheels, which wasn't something that was done as much then as it is now given fewer wheel choices. But the biggest spotlight was, here's this car in this big time movie, in one of the first modern car chase scenes, and not only does it look good, but he really puts the spurs to this thing. (Whether it's Steve driving or not). You really got to see this car in action as compared to most other movies where you don't see that.<O:p

<FONT face="Times New Roman"><FONT color=white><FONT size=4>At some point something happened within Ford and the car was taken out of the <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:p
The Ford Division President and others did not have a chance to see the show car before it left for <st1:City><ST1:placeLos Angeles</ST1:place</st1:City>. When they got to <st1:City><ST1:place Los Angeles</ST1:place</st1:City>, a crowd of people were standing around the display. They never expected the car to be so well received as it was, and they came back resolved to “do this car.” The reception of the car at the Los Angeles Auto Show allowed the designers to do more than the appearance mods on the concept. <O:p
<O:p
From Show Car to Production<O:p
<O:p
The design team had to prioritize the additions to the vehicle, having to decide what had to be on the car and what could be cut while still maintaining the idea of the concept. The designers were elated to get the ¾ inch drop. Team Mustang had never been allowed to lower a production car before, and the Bullitt remains the lowest production Mustang built given later Federal standards preventing a repeat.
<O:pThe side scoop delete was important to draw it back to the 68. The deletes were in jeopardy of being the stock GT scoops up until the last week before production. Team Mustang wanted the ones we have while the factory wanted to use the stock ones. This "debate" went all the way up the ladder before it was decided to use the scoop deletes and have them put on in paint, (after the vehicle has been painted) which is never done.
<O:p
They could not redesign the hood due to budget limitations, so the hood scoop was designed to be used on the existing GT hood. Sean’s design was reminisant of the late 60’s when all of the high performance Mustangs had hood scoops or other ornamentation on the hood. The design objective was to make the car understated like the movie car. No spoiler, no fog lights and blacked out corral. The spoiler was deleted primarily because of the cost, and in part because it really was unnecessary. The original didn't have a spoiler/ wing so why did this car need it? In many cases, concepts have much more flair than the original. These teasers often are there as a result of nothing more than studio whimsy. Some members on the team thought it looked great, but given the business case, it didn't make sense.
<O:p
Many of the show car items such as the rear fascia could not be reproduced in the time allotted and the tooling cost would have been prohibitive. The Bullitt prototype rear fascia was eventually used on the 03 Cobra. <st1:stockticker>SVT</st1:stockticker> “borrowed” it from the Bullitt show car. The seat design was taken from the 1968 Mustang seats which had vertical pleats. The concept steering wheel did not make production as it would have required extensive testing due to air bag restrictions. The fuel filler cap and red calipers were added to make the car even more distinctive.The instrument cluster and the pedal design/placement were also important elements of the “retro” design. <O:p
<O:p
Sean blacked out the corral to make the car appear understated and give it a “sinister” look. He sold the idea by taking two pictures, one with the corral, and one blacked out. Sean told the group, “Here is the normal pony in the corral, this other pony got out of the corral. You can’t keep this one tied up, and you can’t corral this Mustang”. <O:p</O:p
<O:p
Sean wanted to get rid of the rocker panels from the GT. As Sean puts it “the base model rockers look like running boards”. Stone pecking was a problem that needed to be dealt with. Sean and the team dealt with the problem by utilizing front mud flaps. This is a warranty issue with Ford. They actually have people that study this at Ford. A stone peck checker. Go figure.<O:p
<O:p
Sean wished that everything on the show car could have been on the production car but that was not realistic. Sean wanted to design an all new C-pillar but again cost sent them back. They used the 95/96 C pillar. The snap (or cut back towards the front) on the C pillar is much better than the regular GT and again relates back to the 68 fastback. The front fascia, rear fascia, the larger wheels and tires also would have made the car even better. The tire size was governed by having to turn full lock to lock without touching anything under full Johnson rebound. (The equivalent to the front wheels taking a head on hit into a curb). Ford standards also require designing sufficient room for tire chains. <O:p></O:p>
<O:p
Marketing <O:p
<O:p
The marketing people had no idea what the big deal was with this car. The Bullitt Team found early on that they would have to educate them. Team Mustang began by showing them the chase scene from Bullitt. Marketing wanted to produce other colors, namely red and silver, while the design team had to explain that the vehicle was intended to be understated, it’s not supposed to scream at you. Ultimately everyone agreed to only three colors, green, black and blue. It was to take a bit of compromise to sell the business plan and get the car built. Dark Highland Green was the only color of choice for most of the team, but global marketing was not convinced they could sell 6500 green cars.
<O:p
Ford did sell a nearly even amount of dark highland green and black, and a smaller amount of true blue. Given that nearly 4400 cars were pre-sold before a single car had been built, most of the team still believes Ford could have sold every car in dark highland green. The Bullitt team also championed "grass roots" marketing. Working closer than ever with the enthusiast press and message boards like Stang.net to stir up interest in the car, helped the team push the concept into production.
<O:p
There was almost no money budgeted for advertising the Bullitt, so Ford had to rely on the automotive press and dealers to get the word out about this vehicle. To compound the problem, the start of Job#1 was delayed to resolve various development issues. Job # is the date that the first saleable vehicle leaves the factory. This resulted in the delivery of the cars to the media being delayed. By the time most of the articles were published, the order banks for 2001 cars were closed. These situations combined to limit production to 5582 Bullitts. <O:p
<O:p
The Power Train<O:p
<O:p
The design team wanted the naturally aspirated Cobra motor to power their Bullitt, but <st1:stockticker>SVT</st1:stockticker> had ownership of the 32 Valve engine, so it was not to be. Availability of a sufficient number of Cobra engines was another issue to be dealt with. But the main reason was that clear brand separation had to be maintained between the GT, Bullitt, and Cobra. In order to separate it from the GT, the cast aluminum, long runner FRP intake manifold was put on to increase the HP and add to the cars uniqueness. A larger alternator and under drive pulleys were also added to increase horsepower. <O:p
<O:p
Handling<O:p
<O:p
The larger diameter Cobra brakes were used, providing the best binders ever installed on a GT. Heavier sway bars, shocks and spring rates, along with sub frame connectors from the convertibles all worked with the lowered stance of the car to create the best handling Mustang GT to date. <O:p
<O:p</O:p
Limited Edition Numbering<O:p
<O:p
Numbering the cars was an issue. The laser etched serialized plates used now were not available in 2001. The plastic sticker was the most cost effective way of numbering the cars. The sticker was developed because Team Bullitt was told the R code was not available for use (as it was to be on the Mach 1). A small number of the serial stickers were damaged as assembly was still a manual process and prone to human error from time to time. There were ample but closely controlled number of labels made. Each one, damaged or otherwise, was accounted for and is in safe keeping with the list of the vehicle numbers produced.<O:p></O:p>
<O:p
In Closing <O:p
<O:p
Although not all inclusive, we hope this short history gives insight into the concept, design and production of the 2001 Mustang Bullitt. We compiled it to record the history for present and future Bullitt owners to understand the special place this vehicle holds in Ford history. <O:p
<O:p
Thanks to: Sean Tant, Chris Ihara of Stangnet, Nick Terzes and IMBOC for assistance in putting this short history together. <O:p></O:p>
 

·
Premium Member
Joined
·
18,432 Posts

·
Registered
Joined
·
5 Posts
Thanks for sharing the information! Came by my Bullitt by accident and I'm hooked! Drive it daily and have so much fun. Grandma in the Black Bullitt!
 
21 - 24 of 24 Posts
Top