Mustang Bullitt Forum banner
1 - 11 of 11 Posts

·
Registered
Joined
·
2,319 Posts
Discussion Starter · #1 · (Edited)
Ok, first off the whole reason behind this round of mods- a leaky steering rack-
http://www.imboc.com/forums/attachment.php?attachmentid=12236&stc=1&d=1233515434

So I also decided to fix this gap a little-
http://www.imboc.com/forums/attachment.php?attachmentid=12237&stc=1&d=1233515598

With these-

http://www.imboc.com/forums/attachment.php?attachmentid=12238&stc=1&d=1233515837

And here is the result-
http://www.imboc.com/forums/attachment.php?attachmentid=12239&stc=1&d=1233516116

http://www.imboc.com/forums/attachment.php?attachmentid=12240&stc=1&d=1233516499

http://www.imboc.com/forums/attachment.php?attachmentid=12241&stc=1&d=1233516499

http://www.imboc.com/forums/attachment.php?attachmentid=12242&stc=1&d=1233516499

http://www.imboc.com/forums/attachment.php?attachmentid=12243&stc=1&d=1233516569

I'm not great with the camara, nor with posting photos, so the sizes are not the same. Sorry.

So to date, here are the mods I've done to 2445 since owning her-

Flowmaster 40 series mufflers
K&N drop in filter
Optima Red Top battery
8000k HID headlight kit
RetroRings guage inserts
Baer Decelarotors (front only)
Ford Racing Stainless Steel brake lines
Hawk HPS pads
Nitrogen filled Nitto NT555 tires
H&R springs
Pioneer 6-DVD stereo w/ 7 inch touchscreen, XM radio, iPod control, Bluetooth
for the phone and Aux jack in the fog light blank out, Pheonix Gold 600
watt amp powering JL Audio ZR650csi speakers in front and a 10w1 in the
trunk with an 8" shorty antenna
Alpine SEA-8081 alarm to protect the car
PY Protector to protect the hologram (Thanks again Cochese!)
Window automation module (for full auto, up and down, both sides)
Whistler radar detector to protect my insurance!
 

Attachments

·
Registered
Joined
·
2,319 Posts
Discussion Starter · #2 ·
OK. I'm a computer moron. I just spent 45 minutes resizing these pictures to show them in the the text, and all I get is links to the pics and thumbnails in the bottom. but you get the picure!
 

·
Registered
Joined
·
2,319 Posts
Discussion Starter · #4 ·
Looking at the most expensive mod of all- a new house. Our house now has no garage and the kitchen is too small. Found one we both like and will talk to the bank this week about the loan. After that, I think completing the suspension, and 400 RWHP with no blower, no N2O. :wink:
 

·
Registered
Joined
·
2,319 Posts
Discussion Starter · #8 ·
tigerhonaker said:
Marc,

Looking Low and Mean man...........

Now, what about that Blower ...............

Thanks for the Heads-Up on the Thread ..........


tigerhonaker
No blower. New Trick Flow 2 Valve heads, Comp Cams "nasty" grind, CAI, long tubes and no cats, plenty of tuning, bigger Throttle Body (maybe single blade Accufab) and port work on intake. Aluminum Flywheel and driveshaft Methinks close to 400 RWHP on 91 octane.
 

·
Registered
Joined
·
29,355 Posts
installermarc said:
No blower. New Trick Flow 2 Valve heads, Comp Cams "nasty" grind, CAI, long tubes and no cats, plenty of tuning, bigger Throttle Body (maybe single blade Accufab) and port work on intake. Aluminum Flywheel and driveshaft Methinks close to 400 RWHP on 91 octane.
Now that is some Serious Mods...........

Should be interesting once it all takes place.


tigerhonaker
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top