Mustang Bullitt Forum banner
1 - 1 of 4 Posts

· Registered
393 Posts
275/40 nitto will pushing the limit on a 17 X 8 rim. I've seen people run 'em, but it scares me everytime they're doing a burnout. I just keep thinking one's going to seperate from the rim. I'm not so sure the contact patch is going to be optimal either. Be careful with the air pressure too. Anything below 20psi (which is what you really need to do) and its going to be dicey.

I'm looking into some Weld rims and a MT ET street combo. I'll let everyone know how it turns out.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.