Mustang Bullitt Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
72 Posts
Discussion Starter #1
Well after several inspections of my bullitt I have found a couple things wrong.

The first is the alignment of the driver side mud flap and wheel well. I am attaching a picture of the flap in question. How does this compare to everyone else's? Also I can stick my finger between the inner lip on that fender and the wheel well near the misaligned flap.
driver's flap

passenger's flap



The second is the alignment of the passenger side front fender and bumper cover. I will also attach photos of this as well.

Passenger's Well

Driver's Well


I will have to get these corrected on my 1500 mile check-up visit unless someone has a better idea.

This will be my first post so please be patient.
 

·
Registered
Joined
·
199 Posts
I have the same problem with my drivers side mud(?) flap.
 

·
Registered
Joined
·
4,591 Posts
John,
My drivers side mud flap was just about ready to fall off, the screw that goes in the frt (just behind the frt tire) was hanging out because the anchor nut was missing and the screw had nothing to hold on to. The service guys and gals took care of it in 5 min.
 

·
BEST BULLITT Nats 06
Joined
·
13,067 Posts
Hubby had to work on passenger side mud flap on #344 after we took possession. It was loose and he tightened up the anchor bolts.
 
1 - 4 of 4 Posts
Top