Mustang Bullitt Forum banner
1 - 4 of 4 Posts

·
Premium Member
Joined
·
474 Posts
Discussion Starter · #1 ·
I wanted to see if anyone here has had this problem. My clutch is messing with me...sometimes it seems it doesn't engage when letting it out until almost to the top of the clutch travel (about 3/4 the way up)..and other times it engages properly - near the floor. Its not slipping at all. Any one have any ideas?

Rob
2008Bullitt0867
 

·
Registered
Joined
·
158 Posts
Mine has a fairly high clutch engagement compared to other sticks I've driven, but the stock GT I test drove was the same way.
 

·
Registered
Joined
·
26 Posts
It’s a hydraulic clutch so you don’t have to adjust it, but the normal engagement point on it is pretty high as mentioned above.
 

·
Registered
Joined
·
825 Posts
Hi Rob, since we live so close, pm me if you want and we'll hook up and you can drive mine to see if it feels any different than yours. I haven't noticed any issues with the clutch travel on mine. Mike
 
1 - 4 of 4 Posts
Top