Mustang Bullitt Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
959 Posts
Discussion Starter #1
Bypassed my clutch safety switch. Now I can start her having to push the clutch in and putting unecessary wear and tear on the crank thrust bearing. It will be of even more benefit with a heavier clutch down the road.

Brian
FordBullitt #66
 

·
Registered
Joined
·
959 Posts
Discussion Starter #3
It's pretty easy. You can locate the switch at the top of the pedal assembly under the dash. Move the clutch pedal with your hand and you will hear it click when the pedal reaches the floor. It is on the assembly near the top of the clutch pedal arm. There is another switch for the cruise control disenfagement you will hear click when you forst move the clutch pedal, but it is located on the other side of the pedal assembly.

Once you have located the switch, disconnect the plug going toit, make a jumper wire to jump the terminals on the plug and you are done!

Brian
 
1 - 3 of 3 Posts
Top