[wabirch]

Anyone know if the Ford Racing strut brace would install in our cars? Also, any way to then move the production plate to this brace?

 

[RCSignals]

Our strut brace is the FR strut brace. Hold a mirror under the plate section.

 

[Jeffroe]

RC means that if you hold a mirror under the plate on the brace you will be able to see that it has Ford Racing embossed on it's underside.
So what's wrong with your brace?

 

[wabirch]

RC and Jeff -
Thanks for the info. Nothing wrong, I am just shopping for some room to install a supercharger. Thought the FR strut brace for SVTs and KRs would be a different design allowing for a bit more height clearance with no need to grind back the stock strut brace. I should have been clearer.

 

[RCSignals]

Our strut brace is tall. It's also recommended for use on a V6 car, as the V6 engine id taller than the V8. Some supercharger units will clear, others will need some clearance on the brace.

I think our brace is actually better than what is used on the GT500.

 

[jymontoya]

FYI- You can get lowering Prothane motor mounts from JDM. It'll give you a bit extra clearance. We installed some with our longtubes, and hopefully will allow clearance for the Saleen supercharger, but if not, i've got another idea or three.