Mustang Bullitt Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter #1
I am contemplating the purchase of H&R sport springs for 3520! I have the 17x9/10 with 275/40 out front and 315/35 out back. If I go with the H&R sport springs will I have any clearance issues? Also if anyone has pics of this set up send em my way.
 

·
Registered
Joined
·
987 Posts
capnrav said:
I am contemplating the purchase of H&R sport springs for 3520! I have the 17x9/10 with 275/40 out front and 315/35 out back. If I go with the H&R sport springs will I have any clearance issues? Also if anyone has pics of this set up send em my way.
U will b fine. I'm putting the same spring on mine I have 20x9/10.

I have the H&R Super Sports on my 96 with 17x9/10 and have never had a problem. I will see if I can dig up some pics.
 

·
Registered
Joined
·
798 Posts
I have the H&R Super Sports on 2425 and I have to watch it when I pull into my driveway. The only thing that I have a problem sometimes with clearance wise is the mudflap pieces on the rocker panels scraping.

Pic in sig...
 

·
Registered
Joined
·
273 Posts
I have H&R Super Sports and 18x9 (265x35x18) and 18x10 (295x35x18) and do not have any clearance issues. It did became a rough ride so I had some Bilsteins HD struts and shocks installed along with a MM Full Length Sub-frame connector and that made a huge difference in the ride quality.
 

·
Registered
Joined
·
937 Posts
1 - 7 of 7 Posts
Top