[Joe Bullitt]

any tips or pics without would be GREAT !

 

[Bullitt4542]

There are holes under the GT emblems. Removing them would leave the holes exposed, but if there weren't any, then I know a lot of people would remove them.

 

[Joe Bullitt]

Thanks Bullitt4542 Thats what I was wondering :smile: kinda sucks though :sad:

 

[Mustang 3]

Check with a Ford dealer-look at a shop book. I've be told they are only on the cars with a heavy duty double sided tape--you can work under it with teflon coated dental floss--I know Saleen and other tuners remove the GT emblems and install other things so I question the use of holes on the 99 and up Mustangs--don't give up quit yet-

Bullitt 1046
01 S281SC 93

 

[Falaffel]

i recently put the v6 emblems on mine. uner the gt is one large indented hole, and one smaller alignment hole directly above it. if you are going to put in the v6 emblem, it is a direct replacement. it is going to take a lot of work though if you don't want anything there at all. hope this'll help

 

[Joe Bullitt]

Thanks for all the help guys !

 

[RobertC]

<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE>
On 2002-02-15 23:52, Falaffel wrote:
i recently put the v6 emblems on mine. uner the gt is one large indented hole, and one smaller alignment hole directly above it. if you are going to put in the v6 emblem, it is a direct replacement. it is going to take a lot of work though if you don't want anything there at all. hope this'll help

</BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE>

You are putting V6 emblems on your Bullitt? Did I read that correctly? If so, why are you doing that?

 

[Blakwing]

I had thought about doing the same thing with mine. The V6 emblems are the "Mustang" emblems.. the Running Horse in front of the red, white and blue bars.

 

[Y2K16T8]

I took the GT's off and put the V6 ponies on. It looks great.

 

[Joe Bullitt]

<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE>
On 2002-02-19 07:26, Y2K16T8 wrote:
I took the GT's off and put the V6 ponies on. It looks great.

</BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE>


Hey where'd you get the Ponies ?

 

[Falaffel]

RobertC:
i did this for a couple of reasons. the v6 emblems (running ponies) are more in line with classic mustangs, secondly our cars were mustangs before they were gt's or even bullitts, and thirdly, our cars look like regular v6's with a whole lot of mods anyway, so why not go all out with the sleeper look? and in my opinion, the ponies look better than the gt emblems.

oh, Joe Bullitt, you can go to your local dealer and get the emblems for 20-30 bucks, they are just regular v6 mustang emblems, and make sure you get both the left and right side (the mustang should always run towards the front of the car)

_________________
2001 DHG Bullitt #01326
Restoring a 1966 Candyapple Red Mustang Coupe

<font size=-1>[ This Message was edited by: Falaffel on 2002-02-19 10:51 ]</font>

 

[RobertC]

For some reason, I thought that you were putting badges on your car that literally said "V6," as opposed to the running ponies. That is why I was so surprised. Blame it on posting while tired.

 

[rpittman]

Putting V6 emblems on your Bullitts? You crowd are shot.

 

[RobertC]

<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE>
On 2002-02-19 19:12, rpittman wrote:
. . . You crowd are shot.

</BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE>

???

_________________
Bullitt #4256

<font size=-1>[ This Message was edited by: RobertC on 2002-02-20 12:50 ]</font>

 

[Dona]

I don't understand that one, but to each his/her own. I like the GT emblem. People have a hard enough time knowing what it is...why make them think it's a regular V6? Not for me.....

 

[68DARKHORSE]

My 68 has GT on it not a pony. Only non GT's have a pony. That is the classic style. All three of my stangs have V8's and I would never let anyone think otherwise.

 

[68DARKHORSE]

I agree. I think the Bullitt should have come without badges and without the horse in the grille, like the movie car. It should have come without a hood scoop also. What would have been really cool is if it had a Saleen hood, then it would have air extractors like the 68. It should have been made only in green. But since my 68 is black I got a black one.

 

[mustang_bullitt]

dude the coolest thing i've seen done with the the GT being taken off is puting in some APC side markers they fit great and look cool at night.
Highland green= white light
True blue= blue light
black= green light
hope that helps. i still the GT on mine but have seen many with the APC sidemakers.

 

[68DARKHORSE]

Sounds like rice to me, but I think I would rather see that than a 6er badge on a GT.

 

[RELOAD68]

<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE>
On 2002-02-21 15:47, kfengler wrote:
My point to not having the GT badges on the fenders has nothing to do with trying to make anyone think it's a V6, or anything else. I just happen to like the smooth, clean look. I must admit I do like the GT better than what is on the V6, and since there are holes in the fender the GT stays
I finally took my horse off the grille that I installed in the car just before Christmas.
I do like the look from a distance now, with the fog lights and plain black grille... my kind of look!

</BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE>Leave the horse on but paint it black. It give the car an agressive look. That's what I did.