Mustang Bullitt Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
5,012 Posts
Mbaksa said:
Does anyone know if the stock Bullitt shift knob will fit on the stock stalk which comes with the GT short throw shifter from Ford Racing. It also comes with a chrome stalk with white shift knob but I'd rather keep the stock Bullitt knob if I can. Thanks
The shifter from Ford Racing comes with two shift stalks. the plain threaded one accepts the stock knob, the chrome one with the white ball doesn't.
 

·
Registered
Joined
·
5,012 Posts
08 Shifter said:
Don't forget to really make it fit you will need a Mustang GT shifter boot.The hole in the Bullitt boot is too small to work properly.Trust me if you want a sanitary install.
The Bullitt boot should work with the stock style shift lever that accepts the stock knob.

The GT IUP boot that has aluminum trim would be a good substitute for the bullitt boot if using the Hurst lever. It looks the same as the Bullitt trim but has the larger hole.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top