Mustang Bullitt Forum banner

Jack & Jackstands

2482 Views 18 Replies 13 Participants Last post by  PhotoRick
So my girlfriend noticed that I'm always borrowing my dad's jack and Jacks tans when I work on my Bullitt and thought getting me my own would be an excellent Christmas present.

Could you guys recommend any Jacks and/or jack stands that are inexpensive and good for working on out Bullitts. My 08 is the stock height now, but I may drop it an inch at some point, so I'll need a jack that's going to be able to operate on a slightly lowered Bullitt.

What should I suggest?
1 - 1 of 19 Posts
1 - 1 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.