Mustang Bullitt Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter · #1 ·
I was wondering if there is any company that offers a plate style set up for the bullitt intake that either goes between the upper and lower or between the tb and intake? I have called NOS to ask about the nossle system but they say it won't work on the Bullitt intake only the GT. I have also tried Zex with no help. Both companies tech support advise me to use a universal nozzle set up. Any thoughts?
 

·
Registered
Joined
·
826 Posts
Have a machine shop make you a custom plate that fits in between the upper and lower intake. Tap a hole in the side to insert a fogger nozzle. You can use the gasket as a template. You may need longer bolts. Below is a link to a plate for a mustang GT that has this setup.

mustang gt plate
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top