Mustang Bullitt Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
448 Posts
I've been checking into this as well, and Nittos website shows that the minimum width for the 275's is 9 inches, our stock rims are 8. :sad: I've heard people say they they will fit, but I'm not sure I would try it if the manufacturer says not to do it. They have the 555R in our stock size, but not anything in between the 245 and 275. I figure the choices are narrowed down to either 245's on the stock rims, or buy 2 275's and rims to put on when I go to the track.

:bullitt:
 

·
Premium Member
Joined
·
5,360 Posts
once again, i ran 275/40's on the rear of both my 97 GT (Michelin Pilots)and 99 GT (Dunlop Sport SP 5000's) with the stock 17 x 8's and never had any problems. loved them in the dry, harder to handle in bad weather(heavy rain and snow) than stock 245's cuz of the width. every tire is a little different but i think you'd be OK
(and i ran them HARD in dry weather!)
just my .02

_________________
mystang99 - (Marty)
2001 Bullitt DHG #648
Ford Racing Alum. Driveshaft
Steeda Tri-Ax Shifter, K & N Filter,
MGW LTD-All custom Satin Bullitt Bits & Pieces

<font size=-1>[ This Message was edited by: mystang99 on 2001-11-16 17:11 ]</font>
 

·
Registered
Joined
·
340 Posts
<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE>
On 2001-11-16 14:45, llama_boy wrote:
So they will fit on the stock wheels, or are you having them mounted on different wheels?
</BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE>

I have a spare set of rims not the bullitt rims that are 17x8. Since so many people have put those tires ont 17x8 rims I plan to put them on my 17x8 rims. These will be my track tires.

_________________
anumis

Black Bullitt #1574
100MM Densecharger
anumis bullitt

<font size=-1>[ This Message was edited by: anumis on 2001-11-16 17:47 ]</font>
 
1 - 6 of 6 Posts
Top