Mustang Bullitt Forum banner

OEM Air Filter PN change

575 Views 1 Reply 2 Participants Last post by  Bullitt02892
Old part number is FA-1634 has been replaced with FA-1632
The new filter is a very tight fit and you will probably have to press it onto the MAF first and then into the filter housing. You may have to use a screwdriver to actually push the edge of the filter into the housing.

For the heck of it I took my filter apart. Over 19 feet long. Looked to be about 1150 SQ inches.
1 - 1 of 2 Posts
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.