[Bullitt4204]

Will the old style Magnum 500 wheels (15" x 7") fit a regular 1999 thru 2004 Mustang GT's with smaller brakes? Would spacers be needed?

 

[54deuce]

www.wheelvintiques.com #94 magnum 500.

 

[Bullitt4204]

I'm not paying $600+ per wheel, if the old Magnums (cost about $200/wheel) will fit. That's why I'm asking the question. I think $600+ for a wheel like this is CRAZY!!

 

[McQ Stang]

http://www.wheelreplicas.com/magnumwheels.html

 

[McQ Stang]

I think the center bore diameter on the old Magnum 500's is too small. Also the offset is wrong and the wheels will stick out.

 

[Bullitt 736]

Try this one Rick. 15x7 are $180 each plus caps and lugs. Not sure the backspacing is deep enough. They're like the original steel wheel. That's still eight bills. What are you thinking about?

http://wheelvintiques.com/shopsite_sc/store/html/page45.html

 

[Bullitt4204]

Try this one Rick. 15x7 are $180 each plus caps and lugs. Not sure the backspacing is deep enough. They're like the original steel wheel. That's still eight bills. What are you thinking about?


I'm thinking about saving $400/wheel if they would work.:lol:

 

[Bullitt4204]

http://www.wheelreplicas.com/magnumwheels.html

These have the machined finish (instead of chrome), and only come in 18" or larger. I don't want to roll on the rims, and prefer a taller side wall for a smoother ride.

 

[54deuce]

I'm not paying $600+ per wheel, if the old Magnums (cost about $200/wheel) will fit. That's why I'm asking the question. I think $600+ for a wheel like this is CRAZY!!

If you want cheap get 2003,04 mach1 rims that will fit.

 

[54deuce]

2003 MACH 1 MAGNUM 500 MUSTANG WHEEL

M-1007-M178*


http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=6008

 

[Mus408]

Will the old style Magnum 500 wheels (15" x 7") fit a regular 1999 thru 2004 Mustang GT's with smaller brakes? Would spacers be needed?

Are you going to use them on your Bullitt,with a smaller front brake mod?

 

[McQ Stang]

You could get the chrome 17x9 hot wheel sixty-eight and paint the slots black.

http://cgi.ebay.com/ebaymotors/17-x9-1-New-Hot-Wheel-Sixty-Eight-Rim-5x114-3-17x9_W0QQcmdZViewItemQQcategoryZ43957QQihZ017QQitemZ270304355939QQtcZphoto

 

[Bullitt4204]

Are you going to use them on your Bullitt,with a smaller front brake mod?

Was wanting to put them on my gold 2000 GT conv.

 

[Bullitt4204]

You could get the chrome 17x9 hot wheel sixty-eight and paint the slots black.

http://cgi.ebay.com/ebaymotors/17-x9-1-New-Hot-Wheel-Sixty-Eight-Rim-5x114-3-17x9_W0QQcmdZViewItemQQcategoryZ43957QQihZ017QQitemZ270304355939QQtcZphoto

Similar, but not the same.

 

[54deuce]

So did you order the 03,04 machs in chrome yet or what?

 

[Bullitt4204]

So did you order the 03,04 machs in chrome yet or what?

Nope, not sure what I will do yet. I really wish that whoever makes the old style Magnums, would make them with the correct offset for the 99-04 stangs. I love the chrome and black with the old style rim contours/style. The newer Mach 1 style wheels just don't look as nice, except for Wheel Vintiques, which are $600 + each!

 

[54deuce]

You can always paint the inside black on the chrome 03s.