Mustang Bullitt Forum banner
1 - 5 of 5 Posts

· Banned
Joined
·
7,235 Posts
Discussion Starter · #2 ·
Things are moving right along. Got the JAZ seats mounted and spray dyed gray to match the covers. The 9x15 Weld Wheels came in,and the Hoosier Street Pros will be here shortly.These will be for strip duty,to and from track only. Should give a bit more bite than the BFG Drag Radials. Race weight ,with driver should be at 3000 lbs. or a bit less. Next year,the new TFS aluminum High Ports,and Dart 351W Aluminum block.....Race weight, don't even want to think about it!!!
 

· Registered
Joined
·
1,593 Posts
Sounds like one mean little fox! Back in 1990 I tried to buy a black LX 5.0 with a 5-speed. It was the stripped one with the radio delete. If I remember correctly the price was just around 10K new! Too bad I didn't get it.. those little things sure are sweet and the resale is amazing.
 

· Banned
Joined
·
7,235 Posts
Discussion Starter · #5 ·
The weight before,was 3090 lbs. with me,and 3/4 tank of gas. This is with a fiberglass cowl hood,and all else is steel. Last year I swapped in a tube K-member,coil overs and tube A-arms. Best time last year was 11.75 at 118.1 on the 275-60-15 BFG DRs.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top