Mustang Bullitt Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
543 Posts
Discussion Starter #1
Hi. I cannot locate the label for the recommended tire pressure. Can somebody tell where it is? Thanks.

John
 

·
Premium Member
Joined
·
4,120 Posts
My Glove box says GT 30 and Cobra 32. Sidewall I believe says max 44. We had an earlier post and the word from Tirerack.com was 32.

Mine was delivered with 30, since then I have gone to 32.
 

·
Registered
Joined
·
543 Posts
Discussion Starter #3
Thanks. 30 or 32 PSI sounds like not enough. Right now I have 40 PSI in there. I'll back it down to 35 and see how it rides.
 

·
Registered
Joined
·
124 Posts
In pursuit driving school we are told to leave our psi at 40 pounds. But your bullitt may not be driven as hard as a squad car. On a police car, performance is the goal, not how long they last.
 

·
Registered
Joined
·
543 Posts
Discussion Starter #5
Thanks guys. I backed the PSI down to 35 and will buy a treadwear guage.

John
 

·
Registered
Joined
·
4,591 Posts
Bob thats like spitting on the valve stem to make sure the valve isn't stuck while changing air pressure
 

·
Registered
Joined
·
223 Posts
Bullitt 2075 was delivered with 40PSI all around. I have lowered it to 32 and the car feels spongy. I brought it back up to 38PSI and i think thats the sweet spot for me.
 

·
Premium Member
Joined
·
5,360 Posts
2 of mine had 44, one had 40, and one had 38( nice dealer prep huh?)
i run 35 in rear and 32 in front
 
1 - 9 of 9 Posts
Top