Wow, that sucks. Got a pair on my Bullitt now but was thinking of ordering a new pair. After nine years, the paint starting flaking off so I had this company paint them and they painted over the clear panels that you are supposed to see through...anyway, I will sign up for another pair.

 

good to hear someone else is interested.
in my opinion they will hit 200 pre paid orders early.

just to keep in mind if you order there is NO guarantee they will make them. and if they do make them, you probably won't see then until fall of NEXT year.

 

better spread the word on other forums. don't know you would get 200 just on here.

 

here is a link to the post on s197 about this.
https://www.s197forum.com/threads/heres-your-chance-to-get-a-pair-of-shr-flush-mount-louvers-2005-2009.135270/unread

also the offical link with a copied response from silverhorse racing describing the pre-paid order situation.
https://www.s197forum.com/threads/heres-your-chance-to-get-a-pair-of-shr-flush-mount-louvers-2005-2009.135270/unread

i also posted in my local mustang club facebook page

 

I’ve been looking for weeks now to get a set for my 01’. No luck. I’m guessing they don’t have a set or two of those laying around for purchase do they? I’d be more than happy to preorder a set of those. I wish the fit for the years was interchangeable.

 

The Final Run!!!

I just talked to SHR this morning, and they are making one last run of them.

THIS IS THE FINAL RUN!!! They will be ready to ship by the end of August or early September. Get them While you can!

The BULLITT I just bought already had a set installed. I pre-ordered two sets in case I ever need them.

 

Here's an update from SHR 0n 08-30-2019:


"Quick update on our louver run for the 05-09 Mustang owners out there on our preorder list - material has arrived!!

With the material and bulk packaging (as well as final packaging) now here on-site, we are just awaiting available time on the 300 ton injection molding press we use to make these pieces to be able to make the run. Given the impending hurricane, our schedule is a bit uncertain at this moment, but as long as no major damage / power outages are sustained that take us offline for more than a day or so, we are looking at approximately 3 weeks until we have pieces ready to start shipping!

Stay tuned, and we'll have more updates as they become available."

 

that's cool, it would be nice to actually get them in my hands.
i ordered 2 sets extras just in case i might need them. i am thinking maybe order a couple more.

 

Here's a quick email update I received:

"We’re in production of the flush-mount louvers now, and expect to wrap up over the next couple of weeks.

We are offering our pre-order customers the option to have them painted by the same painter that did them for us for over 12 years. The cost for painting is $225.00, and it will add about 6-8 weeks to the delivery time."

 

I talked to Marcello Canitano on September 18, and they were done pressing them. IIRC, SHR had to make 500 sets, because the press company set the minimum for setup/press time. I have two sets ordered and will be prepainted. I should be receiving them by Thanksgiving.

 

i got my 4 set delivered last Friday.

just for info they are NOT pre painted.

 

Thanks for the information on this. Do you have a photo of the unpainted parts?

 

i put them in storage already. i will try to do this Saturday.

 

Back in stock, both versions.
was on the fence , but just ordered the painted, they are just too cool.😁💥

 

I had mine painted PX by SHR and received them early this year(February?). I have to say they look awesome!

I need to replace the ones that were on the car when I bought it, because whoever painted them sprayed the coats too heavy which gives them a slightly crackled and uneven finish..